Use the Year/Make/Model fitment search at the top of any page. Enter your vehicle and the catalog filters down to parts confirmed to fit. If you're unsure about a specific listing, contact us at orders@grocerygetterperformance.com with your VIN and we'll confirm before you buy.
Pre-Order
Eventuri Audi 8Y RS3 Black Carbon Intake System
Regular price
$1,895.00 USD
Ask a question
Share
Couldn't load pickup availability
Description
The Eventuri Audi 8Y RS3 Black Carbon Intake System is a complete high-flow induction system engineered specifically for Audi's turbocharged 2.5 TFSI five-cylinder engine. Developed using extensive flow bench testing, intake temperature logging, and real-world validation, the system substantially increases airflow capacity while maintaining a sealed cold-air architecture designed to control intake temperatures under sustained load.
Flow testing demonstrates the difference between the Eventuri system and the factory 8Y RS3 intake. The factory intake flows approximately 530 CFM, while the Eventuri system increases airflow capacity to approximately 840 CFM. This significant reduction in intake restriction allows the turbocharger to draw air more efficiently and provides the airflow capacity required for applications ranging from stock vehicles to builds exceeding 1,000 wheel horsepower.
On stock-turbo vehicles, Eventuri reports performance gains of approximately 15-20 horsepower and 13-18 ft-lb of torque. In addition to increased power potential, the reduced restriction is designed to improve turbocharger efficiency and throttle response, with the benefits becoming increasingly important as boost pressure and airflow demand rise.
At the center of the system is Eventuri's patented Venturi filter housing, manufactured entirely from pre-preg carbon fiber with no fiberglass incorporated into the construction. The carbon manufacturing process creates a smooth internal surface designed to reduce turbulence as air transitions from the oversized filter into the intake tube. A bespoke 210mm dry cone filter provides more than 130,000 mm² of filtration surface area, supplying the system with the filter capacity required to support its increased airflow.
From the Venturi housing, airflow travels through a smooth 103mm internal diameter carbon fiber intake tube toward the turbo inlet. The large cross-sectional area and gradual curvature are designed to maintain airflow velocity while minimizing restriction and abrupt changes in direction throughout the intake tract.
Cold-air delivery is handled by a sealed carbon fiber inlet duct that draws ambient air from the factory front slam panel area. Eventuri also incorporates an elevated secondary opening behind the hood, significantly increasing the amount of ambient air available to the filter. According to Eventuri, this secondary feed provides airflow capacity equivalent to an additional 7-inch diameter air source while retaining the thermal benefits of a sealed intake system.
A dedicated gold reflective heat shield further reduces radiant heat transfer from the surrounding engine bay. By combining increased airflow capacity, a sealed cold-air supply, thermal shielding, and Eventuri's patented Venturi housing into one coordinated system, the 8Y RS3 intake is engineered to support both factory and significantly higher-output 2.5 TFSI applications.
Product Details
- Designed specifically for the Audi 8Y RS3 with 2.5 TFSI five-cylinder engine
- Approximately 840 CFM airflow compared to 530 CFM through the factory intake
- Designed to support applications from stock power levels to builds exceeding 1,000 WHP
- Approximately 15-20 horsepower gain on stock-turbo vehicles
- Approximately 13-18 ft-lb of torque gain on stock-turbo vehicles
- Patented Eventuri Venturi filter housing
- 100% pre-preg carbon fiber construction with no fiberglass components
- 103mm Venturi housing outlet
- 103mm internal diameter carbon fiber intake tube
- Smooth intake tube curvature designed to reduce restriction and turbulence
- Bespoke 210mm high-flow dry cone filter
- More than 130,000 mm² of filtration surface area
- Sealed carbon fiber cold-air inlet duct
- Secondary ambient air feed positioned behind the hood
- Gold reflective heat shield designed to reduce radiant heat transfer
- Includes OPF (DWNA) breather adapter
- Laser-cut stainless steel mounting brackets
- Includes OEM-specification silicone couplers, reducer, and breather hose
Related Products
Fitment
Return Policies
Shipping Policy
Pairs well with
Collection list
Have a question?
Help center
If you have any questions about your order, returns, or products, our team is here to help. Contact us directly and we’ll get back to you as soon as possible
How do I know if a part fits my vehicle?
My vehicle isn't showing results, do you still have parts for it?
Will this part fit my trim level / engine option?
How long until my order ships?
How long will delivery take?
How do I track my order?
Do you offer financing or buy-now-pay-later?
My part arrived damaged or defective. What do I do?
